Forest Fire Class A Foam C6 Chemistry
City Fire Class A (C6 Chemistry) Fire Fighting Foam Concentrate / Extinguishing Agent Suitable for Use 01% Formulation for Forest Fire, used to extinguish fires caused by wood, bamboo, paper, cloth, brush etc. the surfactants provide superior fire and vapor suppression for Class A Solid fires. This extinguishing agent exhibit low expansion foam fire extinguishing properties
Performance & Application
It can be considered as a Class A firefighting foam short-term forest fire retardants deserve a special consideration by the field-of-use. They have to be used at mixing ratios between 01% depending if the foam is used as a wetting agent or if it is preferred to be applied as structural foam, stuck to trees and bushes to extinguish the fire and confer greater resistance to reignition.
They should be able to be used in land-systems (foam nozzles, fog-stream, high pressure) as well as air-systems (planes, helicopters, hydroplanes)
Due to the system, they are used in, these Class A foams must possess good anti-corrosion properties in materials such as iron, brass, aluminum, magnesium, etc. which are commonly used in the aeronautical sector. Importantly, they also need to have the lowest environmental impact possible, to allow for the re-germination of plants in the treated territory.
Can use also on rubber (tires), coal, paper and many other types of Class A fuels and Class B Fire.
Major field of application can be: Fire Brigades, Mining, Aerial Application.
Test Standard:
BS EN 1568-3:2008
Storage/Shelf Life:
More than 07 years in original unopened Packing
Packing: 25 Ltr, 200 Ltr & 1000 Ltr
Technical Specification
- Appearance: Red Color Liquid
- Density g/cm3: 1.015 ~ 1.030
- pH: 6.5 ~ 8.5
- Viscosity 20ºC: <25 mPas
- Induction /Mixing Ratio: 1%
- Drainage Time 25%: >7 Time
- Medium Expansion Index 1%: >100 Time
- High Expansion Index 3%: 700 Time
- Drainage Time 25%: >10 min
- Storage Temperature: -2˚C ~ +60˚C
