Manual Fire Monitor has characteristic with adjustable flow rate, distant range and wide discharging range and the discharge range is also adjustable-have both straight stream and fog stream. Manual fire monitor can be installed in the places of flammable or explosive chemical circumstance, airport, oil area, oil transport wharf, shipyard etc. It is an efficient equipment for putting out fire, and it is also can be fixed on fire vehicles.

The post Single Barrel Waterway Fire Monitor appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Easily mounted to fixed pipework via flanged or threaded inlets the Monitors provide excellent fire risk protection with long jet performance and wide spray patterns. Monitor Nozzles or Canons are available (sold separately) in either Standard or Self-Inducing formats to facilitate use with water or foam as required.

The post Station Monitor appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Can be fitted with an underground 4″ gate valve with spindle cap (sluice valve) and operated by using a hydrant key and bar.

The post 3 Way Pillar Fire Hydrant appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Pillar Landing Fire Hydrant can be classified into two types, namely, landing type and underground type. Landing type fire hydrant, which is a water supplying facility for firefighting use, is very obvious and conveniently operated with its upper part over the ground while the underground type ones are to installed underground to form harmony with the Pakistan’s environment.

The post 2 Way Pillar Fire Hydrant appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Type A (Female single outlet). Single headed oblique type. Its inlet is Flanged or BSPT/ NPT threaded. Its outlet is Female instantaneous or male BSPT/NPT threaded.

The post Fire Hydrant Landing Valve appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Used to connect monitor to fire hydrants hose outlet Cast Iron and Mild Steel inlet and tube / elbow Include welded steel frame and adjustable steel support legs.

Used to connect monitor to fire hydrant’s hose outlet
Cast brass swivel inlet and tube/elbow
Adjustable steel support arms, brackets and mounting hardware

Available Model:

Model 7212:Hydrant mount, 2 1/2″ F. NST x 2 1/2″ M. NPT
Model 7213:Hydrant mount, 2 1/2″ F. NST x 3″ 150# ANSI Flange
Model 7214:Hydrant mount, 2 1/2″ F. NST x 4″ 150# ANSI Flange

The post Hydrant Mount for Monitors appeared first on Fire Fighting Equipment | Fire Safety Equipment.