Explosion Proof Three Infrared Flame Detector AW-FD708EX
The detector AW-FD708EX combines the three infrared band sensors and advanced flame analysis technology, to eliminate false alarms and improve detection range, and can be applied to most commonplace(Pipeline, Electrostatic Paint, Printing, Warehousing, etc.
Product Overview:
The Explosion Proof Three Infrared Flame Detector AW-FD708EX combines the three infrared band sensor and advanced flame analysis technology, to eliminate false alarm and improve detection range, and can apply to most commonplace(Pipeline, Electrostatic Paint, Printing, Warehousing and etc.)
How To Wire The Explosion Proof Flame Detector To Fire Alarm Control Panel?
Product Features:
- Reliable fault diagnosis
- Built-in high-speed, low-power, high-performance 32-bit high-precision data processing chip；
- Adopt patented narrow band current infrared pyroelectric sensor；
- A small fire can be detected earlier；
- The perfect algorithm best combines flame detection and false alarm capabilities；
- The detector is suitable for a variety of fuels；
- It’s suitable for heavy industrial applications；
- It’s low maintenance cost and easy to update and improve.
|
Detection Range |
Fire Source and Size |
Details |
|
|
Maximum Distance |
N-Heptane |
0.3×0.3m |
40m |
|
Gasoline |
0.3×0.3m |
35m |
|
|
Diesel |
0.3×0.3m |
35m |
|
|
Alcohol |
0.3×0.3m |
30m |
|
|
Kerosene |
0.3×0.3m |
35m |
|
|
Methane |
0.5×0.2m |
30m |
|
|
Paper |
0.3×0.3m |
30m |
|
|
Respond Time |
N-Heptane |
<10s |
|
Technical Parameters:
| Model | AW-FD708EX |
| Main Voltage | 18 to 30VDC Volts |
| Operating current (Relay Out) | Monitor: ≦25mA Alarm: ≦35mA |
| (Current Loop Out) | Monitor: ≦30mA Alarm: ≦45mA |
| Maximum Detection Angle and Range |
90° 40m |
| Relay Output | Fault, Fire Alarm |
| Current Loop Out | Fault: ≦2mA Normal:5mA Alarm:15mA |
| Spectral Range | IR:3.8~5.0μM |
| Explosion Proof Certification | ExdⅡC T6 Gb/tD A21 IP66/IP67 T80℃ |
| Protection Class | IP66 IP67 |
| Reset Method | Power off reset, Communication protocol reset, Remote control reset |
| Indicator Light | Three (Fire, Fault, Normal) |
| Environmental | Temperature range: -40 to 85°C Humidity: 0 to 96% RH, non-condensing can withstand 100% condensation humidity for a short time |
| Materials and Colors | Cast aluminum, baking varnish on the surface (the coating with insulating layer), Red |
| Electrical Interface | 1 × 3/4NPT 、 M25*1.5 、 G3/4 (Adapters can be customized according to requirements) |
| Size | 120mm* 95mm* 85mm |
| Weight | about 0.7kg |
