Walk in Customers 9:00am to 6:00pm Dismiss
Walk-in Customer Nazimabad No.3, Karachi.
Walk-in Customer Nazimabad No.3, Karachi.
Showing 1–21 of 30 resultsSorted by latest
4 way Breeching Inlet (Flanged)
Dimensions: 328mm (L) x 280mm (W) x 270mm (H)
Working Pressure: 10 Bar
Test Pressure: 20 Bar
Outlet Size: 150mm (6″) Table E Flange
Inlet Size: 65mm BS336 Male Instantaneous
Material: Cast Iron (Body) / Copper Alloy (Male Inlet)
Finishing: Red
The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a waterflow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves. The PS10 is also suitable to provide a low pressure supervisory signal; adjustable between 4 and 15 psi (0,27 and 1,03 BAR).
Nominal Pressure: 200PSI
Flange Standard: ANSI B16.1 Class 125 or according the customer’s requirement
Both inside and outside the body need Epoxy Resin Coating
Design standard AWWA C515
Manual Fire Monitor has characteristic with adjustable flow rate, distant range and wide discharging range and the discharge range is also adjustable-have both straight stream and fog stream.
The fire tools cabinets for PPE and firefighting equipment are red-painted cabinets with the special, easy to break “safe crash” glass insert.
Ideal for storing fire fighter equipment such as suit, helmets, jackets and boots etc.
On solid superior quality plastic feet for optimum corrosion resistance.
Rail with captive hook for straps, cords etc.
Brand Name: C-Guard
Model No. CF/HC/20
Model No. CF/HC/30
Country of Origin: Pakistan
Suction: 3 inch
Discharge: 2.5 inch
Max. Suction Head: 6 meters
Max. Discharge Head: 25-30 meters
Max. Flow: 750 LPM to 1000 LPM
A jockey pump is a pump connected to a fire sprinkler system and is intended to maintain pressure in a fire protection piping system to an artificially high level so that the operation of a single fire sprinkler will cause a pressure drop which will be sensed by the fire pump automatic controller, causing the fire pump to start. The jockey pump is essentially a portion of the fire pump’s control system.
Control Panel: for Fire Pump set with Batteries. Indication light switch on-off.
Additional Valves & Accessories: Non Return Valves, Suction Header End, Gate Valve, Y Strainer, Rubber Flange, Discharge Header, Gate Valve & Pressure Tank etc. Accessories, Pressure Switches, Pressure Gauges etc.
(Diesel Engine Driven). @8bar-500 GPM
Pump Type: Monoblock
Motor Phase: Three Phase
Power (Horsepower): 30-50 Hp
Voltage (Volt): 110 – 415V
Material: Mild Steel
Max Flow Rate: 250 – 750 GPM
Speed: 2900 & 1450 RPM
Fire Hydrant Fitting adapter for instantaneous fire hydrant Valve
Material: Gunmetal / Aluminum
Operating Pressure: 150 PSI
Sizes: 1.5″, 2″ and 2.5″
Outlet: Male or female instantaneous
Thread: Inner & outer
British Standard Couplings, Light weight & portable, simple operation, convenient, easy to connect. Material: Brass /Aluminum, Operating Pressure: 150 PSI (12 Bar), Sizes:1.5″, 2″ and 2.5″
Use During Fire Fighting Operations
Use During Fire Fighting Operations
Type A (Female single outlet). Single headed oblique type. Its inlet is Flanged or BSPT/ NPT threaded. Its outlet is Female instantaneous or male BSPT/NPT threaded.
Type: Jet – Spray – Shutoff Nozzle
Material: Aluminum Alloy & PVC
Size: 21/2 “ Male Instantaneous
Working Pressure: Maximum 10 bar
Finish: Natural
Operating Pressure: 130 PSI
Light weight easy to carry
The Jet Nozzle can be connected to the end of a Fire hose through an instantaneous adapter
The Jet Spray Fire Nozzle can be connected to the end of a fire hose
The Jet Spray Fire Nozzle can be connected to the end of a fire hose or fire monitor through an instantaneous adapter
Error: Contact form not found.