Compatible with Conventional Fire Alarm Control Panels

Product Overview

The AW-D138C Conventional Smoke & Heat Detector combines photoelectric smoke detection with fixed temperature and rate-of-rise heat sensing, providing dependable fire detection for conventional fire alarm systems.

Designed for indoor open-area protection, the detector features highly sensitive optical sensing, reliable thermal detection, and 360° visible LED indication for rapid alarm recognition. Its two-wire connection enables simple installation with most conventional fire alarm control panels.

Product Features

• Conventional Fire Alarm System Compatible
• Photoelectric Smoke Detection
• Fixed Temperature & Rate-of-Rise Heat Detection
• Two-Wire Zone Connection
• Low Standby Current
• Dual 360° LED Alarm Indicators
• Reliable Open Area Detection
• Durable ABS Housing
• Easy Installation and Maintenance
• High Performance and Long Service Life

Technical Specifications

Typical Applications

• Office Buildings
• Shopping Centres
• Warehouses
• Industrial Facilities
• Hotels
• Hospitals
• Schools & Universities
• Residential Complexes
• Retail Stores
• Commercial Buildings

Advantages

• Dual smoke and heat sensing for improved fire detection
• Reduced nuisance alarms compared to single-sensor detectors
• Reliable performance in a wide range of environments
• Quick installation with conventional fire alarm systems
• Cost-effective protection for commercial, industrial, and residential applications

The post Conventional Smoke & Heat Detector appeared first on Fire Fighting Equipment | Fire Safety Equipment.

For Conventional Fire Alarm Systems

Product Overview

The AW-CTD382 Conventional Heat Detector provides reliable open-area fire detection using dual sensing technology, combining Rate-of-Rise and Fixed Temperature detection for enhanced protection.

Designed for compatibility with most conventional fire alarm control panels, it delivers dependable performance in environments where smoke detectors may be affected by dust, steam, or airborne contaminants.

Product Features

• Conventional Fire Alarm System Compatible
• Dual Detection Technology
  • Rate-of-Rise Detection
  • Fixed Temperature Detection
• Dual LED Indicators with 360° Visibility
• Standby Indication (LED Flashes Every 6 Seconds)
• Alarm Indication (LED Latches ON)
• Automatic Reset via Momentary Power Interruption
• Wide Compatibility with Conventional Fire Alarm Panels
• Easy Installation and Maintenance
• Reliable and Stable Performance

Technical Specifications

Typical Applications

• Office Buildings
• Hotels & Hospitality Venues
• Factories & Industrial Plants
• Warehouses
• Shopping Centres
• Schools & Universities
• Residential Buildings
• Commercial Facilities
• Electrical Rooms
• Parking Garages

Advantages

• Fast response to rapid temperature rise
• Reliable fixed temperature protection
• Reduces nuisance alarms in dusty or humid environments
• Simple installation and maintenance
• Suitable for residential, commercial, and industrial applications

The post Conventional Heat Detector appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Reliable Audible & Visual Fire Alarm Notification

The Asenware AW-D150C Conventional Waterproof Sounder Strobe is a high-performance audio-visual notification device designed for conventional fire alarm systems. It combines a powerful electronic sounder with a high-intensity LED strobe to provide rapid and effective emergency warning in commercial, industrial, and outdoor environments.

Its rugged IP65 weatherproof enclosure ensures dependable performance under harsh environmental conditions, making it suitable for both indoor and outdoor fire alarm applications.

Product Features

• Conventional Fire Alarm System Compatible
• Combined Audible & Visual Alarm
• High-Intensity LED Strobe Light
• Powerful Sound Output (≥105 dB @ 1 m)
• Weatherproof IP65 Construction
• Suitable for Indoor & Outdoor Installation
• Easy Installation & Maintenance
• Durable UV-Resistant Housing
• Reliable Performance for Critical Fire Alarm Applications
• EN54-3 Compliant

Technical Specifications

Typical Applications

• Commercial Buildings
• Industrial Facilities
• Warehouses
• Pump Rooms
• Manufacturing Plants
• Shopping Centres
• Hospitals
• Hotels
• Power Plants
• Outdoor Fire Protection Systems

The post Conventional Waterproof Sounder Strobe appeared first on Fire Fighting Equipment | Fire Safety Equipment.

For Conventional Fire Alarm Systems

Product Overview

The AW-CSD381 Conventional Smoke Detector utilizes advanced photoelectric sensing technology to detect visible smoke generated by smoldering and flaming fires.

Designed for reliable early warning, the detector minimizes nuisance alarms caused by dust or steam while delivering dependable protection for residential, commercial, and industrial applications. It is compatible with most conventional fire alarm control panels.

Key Features

• Advanced Photoelectric Detection Technology
• Conventional Fire Alarm System Compatibility
• Low Power Consumption
• Dual LED Status Indicator
  • Flashing: Standby
  • Steady ON: Alarm
• Automatic Reset After Alarm Clears
• Ceiling or Wall Mount Installation
• Easy Installation and Maintenance
• Wide Compatibility with Conventional Fire Alarm Panels
• Reliable and Stable Performance

Technical Specifications

Typical Applications

• Office Complexes
• Warehouses & Factories
• Residential Buildings
• Shopping Malls
• Schools & Universities
• Hospitals & Healthcare Facilities
• Hotels & Hospitality Venues
• Retail Stores
• Commercial Buildings
• Public Facilities

The post Conventional Smoke Detector appeared first on Fire Fighting Equipment | Fire Safety Equipment.

For Two-Wire Conventional Fire Alarm Systems

Product Overview

The AW-D135C Conventional Manual Call Point is designed for use with conventional two-wire fire alarm systems. When activated, it immediately sends an alarm signal to the fire alarm control panel, providing fast manual fire reporting and emergency notification.

The unit incorporates a red LED status indicator, which flashes during normal monitoring and remains continuously illuminated when in alarm condition. A dedicated reset key enables quick restoration after activation without replacing any components.

Key Features

• Conventional Two-Wire Operation
• EN54 Standard Compliant
• Resettable Manual Call Point
• Reset Key Included
• LED Status Indicator
  • Flashing: Normal
  • Steady ON: Alarm
• Semi-Flush or Surface Mounting
• Durable Flame-Retardant ABS Housing
• Easy Installation and Maintenance
• Reliable Operation

Technical Specifications

Typical Applications

• Commercial Buildings
• Shopping Centres
• Industrial Facilities
• Hotels & Apartments
• Educational Institutions
• Hospitals & Healthcare Facilities
• Residential Complexes
• Warehouses
• Office Buildings
• Public Facilities

The post Conventional Manual Call Point appeared first on Fire Fighting Equipment | Fire Safety Equipment.

(Compatible with AW-CFP2166 Series Conventional Fire Alarm Control Panel)

With ≥85 dB alarm output and a 1 flash per second strobe, it ensures clear notification across protected areas. It integrates seamlessly with AW-CFP2166 conventional fire alarm control panels.

Key Features

• Combined Audible & Visual Alarm

• Alarm SPL ≥85 dB

• Flash Rate: 1/sec

• Low Power Consumption ≤60 mA

• Compact, Durable ABS Housing (IP30)

Technical Specifications

Typical Applications

Office Buildings
Hotels & Apartments
Shopping Centers & Malls
Industrial Facilities
Schools & Universities
Hospitals & Healthcare Centers
Residential Complexes

The post Conventional Strobe Sounder appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Conventional Fire Alarm Control System (LPCB Approved)

The AW-D130C Reflective Optical Beam Smoke Detector is designed for conventional fire alarm control systems and is LPCB Approved. It incorporates high-precision symmetrical infrared laser technology, ensuring stable performance, long-range detection, and dependable fire protection.

Its practical housing design offers flexible terminal connections for easy installation and seamless integration with compatible conventional fire alarm control panels.

Product Overview

The detector continuously transmits an infrared beam to a prism reflector and monitors the returned signal. When smoke interrupts the beam beyond the preset alarm threshold, an alarm condition is activated.

The AW-D130C is ideally suited for large indoor open areas, providing early smoke detection while minimizing the number of detectors required.

Key Features

• Conventional fire alarm system compatibility
• LPCB Approved
• Built-in isolation function
• Infrared remote control operation
• High-precision symmetrical infrared laser
• Reliable long-distance smoke detection
• Suitable for warehouses and open indoor spaces
• EN54-12 compliant
• Detection distance: 5–160 meters
• Easy alignment and maintenance

Technical Specifications

Typical Applications

• Warehouses
• Industrial Buildings
• Logistics Centers
• Aircraft Hangars
• Shopping Centers
• Exhibition Halls
• Power Plants
• Sports Facilities
• Large Commercial Buildings
• High Ceiling Structures

Advantages

• Early smoke detection over long distances
• Reduced installation cost compared with multiple point detectors
• Simple installation and maintenance
• Stable performance in large open environments
• Reliable fire protection for critical facilities

The post Conventional Beam Detector Refletive appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Reliable Fire Detection Solutions

Ziton offers a range of high-quality fire detection devices engineered to provide reliable and early fire detection for commercial, industrial, educational, healthcare, and residential applications. Designed to comply with international fire safety standards, Ziton detectors deliver dependable performance, easy installation, and long-term operational reliability for conventional fire alarm systems.

Product

Z630-1 Optical Smoke Detector

The Ziton Z630-1 is a conventional photoelectric (optical) smoke detector designed to provide early detection of slow-burning and smouldering fires. Utilizing advanced light-scatter optical sensing technology, it offers high sensitivity, excellent stability, and dependable performance in a wide range of commercial and industrial fire alarm applications. It is particularly suitable for environments with air conditioning and modern building interiors.

Key Features

• Advanced Photoelectric (Optical) Smoke Detection
• Early Response to Slow-Burning & Smouldering Fires
• EN54 Part 7 Certified
• Low Profile Modern Design
• High Immunity to Air Movement
• Reliable Alarm LED Indication
• Plug-in Detector Base
• Simple Installation & Maintenance
• Long-Term Operational Stability
• Compatible with Ziton Conventional Fire Alarm Systems

Technical Specifications

*Coverage subject to local fire codes and installation standards.

Typical Applications

• Commercial Buildings
• Office Complexes
• Hotels
• Hospitals
• Schools & Universities
• Shopping Malls
• Warehouses
• Industrial Facilities
• Residential Buildings

Benefits

Fast & Reliable Smoke Detection

Excellent Performance for Smouldering Fires

Easy Installation & Maintenance

Low False Alarm Rate

EN54 Approved Design

Durable & Reliable Construction

Ideal for Conventional Fire Alarm Systems

City Fire & Safety Services (Pvt) Ltd

Supply • Installation • Testing • Commissioning • Maintenance of Fire Alarm & Fire Protection Systems

The post Conventional Fire Alarm Devices Ziton appeared first on Fire Fighting Equipment | Fire Safety Equipment.

Model: AW-CFP2166 Series

Reliable, EN54-Compliant Fire Alarm Control Solution

Product Overview

The AW-CFP2166 Series Conventional Fire Alarm Panel is designed in compliance with EN54 Part 2 & 4 standards. It is the central control unit of a conventional fire alarm system, managing smoke detectors, manual call points, bells, and sprinkler supervision.

With flexible configuration from 4 zones up to 16 zones, the AW-CFP2166 is suitable for both small-scale and large-scale applications.

Key Features

• EN54 Part 2 & 4 Certified – Ensures international fire safety compliance

• Scalable Zones – 1–8 zones standard, expandable up to 16 zones

• Zone Disablement – Individual zones can be disabled via button control

• Multiple Indications & Outputs:

  • Fire Alarm Indication – Red FIRE LED on alarm

  • Sounder / Fire Protection / Fire Routing / Fault Routing Outputs

  • General Fault Indication – Lights up for system errors

  • Mains, Battery, Earth, Fuse & System Fault Monitoring

• Operational Control Buttons – Test, Reset, Evacuate, Silence

• Clear LED Display – Provides real-time system status and fault indication

• User-Friendly Maintenance – Simple troubleshooting with LED diagnostics

Technical Parameters

Applications

Office Complexes
Hotels & Hospitality
Shopping Malls & Warehouses
Industrial Facilities
Residential Buildings
Schools & Institutions

Available Configurations & Price Inquiry

We can provide the AW-CFP2166 Fire Alarm Panel in the following configurations:

• 2-Zone Panel

• 4-Zone Panel

• 8-Zone Panel

• 16-Zone Panel

The post Conventional Fire Alarm Panel appeared first on Fire Fighting Equipment | Fire Safety Equipment.

The TUV Approved Standalone Carbon Monoxide (CO) Detector is a reliable life-safety device designed to continuously monitor carbon monoxide levels and provide early warning of dangerous CO gas accumulation. Featuring an advanced electrochemical sensing element, audible alarm, and visual indicators, it offers dependable protection for residential, commercial, and light industrial applications.

Key Features

• TUV Certified for safety and quality compliance
• High-precision electrochemical CO sensor
• Standalone operation with built-in alarm
• Loud audible warning (typically ≥85 dB)
• LED status and alarm indicators
• Self-diagnostic and fault monitoring functions
• Low battery warning
• Easy wall or ceiling installation
• Continuous 24-hour CO monitoring

Applications

• Residential Buildings
• Apartments and Villas
• Hotels and Guest Houses
• Offices and Commercial Buildings
• Generator Rooms
• Boiler Rooms
• Kitchens and Utility Areas
• Parking Garages

Function: Detects hazardous carbon monoxide gas and provides immediate audible and visual warning to help protect occupants from CO poisoning.

Certification: TUV Approved
Type: Standalone Carbon Monoxide Detector
Country of Origin: China

The post Standalone CO Detector appeared first on Fire Fighting Equipment | Fire Safety Equipment.