The AW-FMC series are high-pressure seamless steel cylinders designed for FM-200 (HFC-227ea) clean agent fire suppression systems. These cylinders are commonly used in total flooding fire suppression systems for mission-critical facilities such as data centers, electrical rooms, UPS rooms, telecom rooms, archives, and control rooms.
Cylinders Detils:
| Model | Capacity | Typical Application | |
|---|---|---|---|
| AW-FMC4042 | 40 L | Small protected rooms / cabinets | |
| AW-FMC7042 | 70 L | Medium server or electrical rooms | |
| AW-FMC12042 | 120 L | Large hazard areas / centralized systems |
Product Details
40 L Cylinder
40‑liter FM200 clean agent cylinder with 4.2 MPa storage pressure for compact suppression systems.
70 L Cylinder
70‑liter FM200 suppression cylinder suitable for network and cabinet type fire suppression systems.
120 L Cylinder
120‑liter FM200 cylinder designed for larger protected hazards and manifold systems.
Product Comparison Table
| Attribute | AW‑FMC4042 40L | AW‑FMC7042 70L | AW‑FMC12042 120L |
|---|---|---|---|
| Cylinder Capacity | 40 L | 70 L | 120 L |
| Working Pressure | 4.2 MPa | 4.2 MPa | 4.2 MPa |
| Cylinder Diameter | 300 mm | 350 mm | 350 mm |
| Approx. Height | 747 mm | 915 mm | 1430 mm |
| Approx. Empty Weight | 34.5 kg | 53 kg | 80 kg |
| Valve Type | QRF32 | QRF32 | QRF40 |
| System Type | Pipe Network / Cabinet | Pipe Network / Cabinet | Pipe Network / Cabinet |
| Discharge Time | ≤10 s | ≤10 s | ≤10 s |
| Fire Classes | A / B / C | A / B / C | A / B / C |
| Agent | FM200 (HFC-227ea) | FM200 (HFC-227ea) | FM200 (HFC-227ea) |
System Characteristics
- Clean agent extinguishing system
- Leaves no residue after discharge
- Safe for electronic equipment
- Fast discharge within 10 seconds
- Suitable for occupied areas
- Nitrogen-pressurized system
- Supports:
- Automatic release
- Remote manual release
- Mechanical emergency release
FM-200 systems are engineered according to NFPA-2001 standards and are designed to suppress Class A, B, and C fires rapidly while minimizing equipment damage.
Typical Components Used With These Cylinders
- Cylinder valve assembly
- Solenoid actuator
- Pressure switch
- Flexible discharge hose
- Selector valve
- FM200 nozzles
- Release control panel
- Smoke/heat detection system
- Manual release station
- Abort switch
Recommended Protection Areas
- Data centers
- Server rooms
- Electrical switchgear rooms
- UPS battery rooms
- Telecom facilities
- Control rooms
- Archives and museums
Technical Notes
- Storage pressure: 4.2 MPa at 20 °C
- FM200 concentration typically: 8–10%
- Maximum fill density: approx. 950–1120 kg/m³
- Operating temperature: 0 °C to 50 °C
- Cylinders are usually painted red and supplied with valve assemblies.
